Toshiba B-EX4T1 Series Owner's Manual page 71

2. PRINTER SETUP
Vista/server 2008/7/Server2008R2, it is not possible to delete the printer driver. First, delete the
printer icon from each user account, then delete the printer driver.
Deleting the setup information configured during the preparation
(1) Select the "Start", "Control Panel", and "Add/Remove Programs".
Note: Log on as the user with administrative privilege.
(2) Select the "TPCL Printer Driver Vx.x (version)" or "TEC Printer Driver Install file" from the list, then
click the [Delete] button.
(3) When the confirmation message is displayed, click the [Yes] button.
(4) When the "Uninstall completed" screen appears, click the [Finish] button.
2) To delete the V6.5 Build75 or V6.5 Build77
(1) Select the "Start", "Control Panel", and "Add/Remove Programs".
Note: Log on as the user with administrative privilege.
(2) Select the "TEC **** printer" from the "Edit/Remove Programs", and click the [Add and delete].
(**** indicates a printer model name. For example, B-SA4T, etc.)
(3) Confirm that the selected file in the "File Delete confirmation" window is correct, then click the [Yes]
button.
(4) When "Uninstall completed" is displayed, click the [OK] button.
Note: If you deleted the printer icon without performing Steps 1 to 4 above, delete the setup information
through the "Add/Remove Programs" after re-installing the printer driver.
(5) When the deletion is completed, reboot the PC.
E2-57
ENGLISH VERSION EO1-33089
2.7 Installing the Printer Drivers