Before Making Prints; Components And Their Functions - Minolta CF3102 User Manual

3.1 Components and Their Functions

3 Before Making Prints

3.1 Components and Their Functions
5
No. Part Name
1 Printer
2 Printer Controller
CN3102e
3 Copy Desk CD-2M (optional)
4 Large Capacity Cabinet
PF-121 (optional)
5 Finisher FN-116 (optional)
6 Option Tray JS-100
(optional)
CF2002/CF3102
6
1
4
Prints the print data transmitted from the printer controller
Referred to as the printer throughout the manual.
For more details, refer to the manual of the printer controller.
• Since this equipment is attached to the back of the printer, it
is not shown in the above illustration.
Referred to as the printer controller throughout the manual.
The printer can be set up on the copy desk.
By setting up the printer on the copy desk, the printer can be
placed on the floor instead of on a desk, keeping the entire
surface of the desk free.
Referred to as the copy desk throughout the manual
Equipped with a paper drawer that can supply 2,500 sheets of
paper
Referred to as the large capacity cabinet throughout the
manual
Finishes prints according to the selected Finishing setting
(sorting or stapling), then feeds out the pages
• If the finisher is installed, the printer must be installed on the
copy desk, on the large capacity cabinet or over a paper feed
unit combined with the copy table.
If finisher FN-116 is installed, the number of paper output trays
can be increased.
3
Description
3
3-1