DieHard 28.7123 Operator's Manual page 11

9.2 attach the foot:
upside down on a flat surface. Attach the foot and secure it with the four ¼-20
thread cutting screws provided.
9.3 assemble the Wheels and axle
surface. Then, using a hammer, tap one of the axle caps onto the top end of
the axle. Be sure to tap the axle cap on straight. Slide both wheels onto the
axle with the recessed hubs facing out as shown. Install the second axle cap.
Remove the charger from the packing materials and place
: Hold the axle upright on the floor or work
8
• •