Sharp SX663 User Manual page 134

Call Costs (M 11-6)
This function lets you check the charges for your calls.
networks do not support Charging Advice. Please check with
your service provider for availability.
Checking the Cost of the Last Call
→
"Call Log" "Call Costs"
Checking the Total Call Cost
→
"Call Log" "Call Costs"
Setting the Charge Rate
Set the charge rate to calculate the call cost and set the
maximum limit for call cost.
→
"Call Log" "Call Costs"
Units"
1.
Enter your PIN2 code.
2.
Enter a currency unit (up to 3 characters).
3.
Enter a cost per unit.
To enter a decimal point, press P.
Setting the Charge Limit
This function is useful if you wish to make sure you do not
exceed a certain charge limit.
→
"Call Log" "Call Costs"
1.
Enter your PIN2 code.
2.
Enter a value.
134 Call Log
(M 11-6-1)
→
"Last Call"
(M 11-6-2)
→
"All Calls"
(M 11-6-5)
→ →
"Cost Units" "Set
(M 11-6-6)
→ →
"Max Cost" "Set Limit"
Checking the Residual Credit
→
Some "Call Log"
Resetting All Call Costs
→
"Call Log"
1.
Enter your PIN2 code.
Data Counter
You can confirm the number of bytes used in the 3G (UMTS)
and GSM transmission.
→
"Call Log"
1.
Select from "Last Data" or "All Data".
Resetting All Data Counter
→
"Call Log"
(M 11-6-3)
→
"Call Costs" "Residual Credit"
(M 11-6-4)
→
"Call Costs" "Clear Costs"
(M 11-7)
"Data Counter"
(M 11-7-3)
→
"Data Counter" "Clear Counter"