The explanations in this manual are based on default settings. The actual screens may differ depending on settings changed after purchase. Note that “SH80F” is referred to as “phone” in this manual. This manual refers to microSD™ Card as “microSD Card” or “microSD”.
For details on software version of your phone nP. 28 New functions may be added to this phone and the operation method may change by upgrading the OS version. Check the SHARP website for the latest information of additions and changes.
Assembly You cannot make a call and use functions such as packet communication etc. on the phone without inserting a SIM card. Before inserting or removing the SIM card, turn off the power, position the back facing upwards and remove the battery pack. Hold the phone securely with your both hands.
Page 5
Removing SIM card and battery pack Remove the battery pack : The battery pack has a tab that makes it easy to remove. Hook a finger on the tab to prevent excessive force on it and remove the battery pack upward. Hook a finger on the tab, pull the tray out (1) and remove the SIM card (2) : Do not allow the SIM card to fall when removing it.
Part names and functions 1 Incoming/Charging lamp The lamp will illuminate/flash according to the function being used and the situation. 2 H: Power key Use to set/disable the sleep mode, turn the power on/off, etc. 3 Display/Touch panel 4 Sub camera 5 Earpiece 6 Proximity sensor/Brightness sensor The proximity sensor detects the distance to the face and prevents inadvertent operation of the touch panel during a call.
Back up the data saved in a microSD Card and store in another place. SHARP shall not be liable for any loss or change of the saved data. Before inserting or removing (including after unmounting) the microSD Card, turn off the power and position the back facing upwards. Hold the phone securely with your both hands.
Charging The battery pack is not fully charged at the time of purchase. Be sure to charge the battery using the exclusive AC adapter and microUSB cable SH10 before use. Cautions while charging Do not charge for a long time with the power left on. If the phone is left on after charging is complete, the battery pack charge decreases. In that case, the AC adapter charges the battery again.
Turning power ON/OFF Turning power ON H (for at least 2 seconds) : When you use your phone for the first time, setting guide helps you enter essential settings. Turning power OFF H (for at least 1 second)/[Power off]/[OK] Sleep mode The screen is off and the sleep mode is activated when H is pressed or the phone is not in use for a set length of time.
Page 10
Flick Flick left/right in the home screen etc. to switch pages. Quickly slide your finger then raise it from the screen Pinch Pinch while displaying an image etc. to zoom. Put two fingers on the touch panel and slide them with putting a distance between two fingers further apart/closer to zoom in/out Operation while using applications Switching the settings...
Multi Assistant (Multitask) If you cancel the use of function by pressing | etc., the function does not end and remains activated in background. Display running functions as a list and switch functions to use by using Multi Assistant (Multitask). In the home screen, [W] : Alternatively, | (for at least 1 second).
Initial setting Setting access point You can add or change the access point if necessary. Checking access point in use In the home screen, [R]/[Settings]/[Wireless & networks]/[Mobile networks]/[Access Point Names] Setting additional access points In the home screen, [R]/[Settings]/[Wireless & networks]/[Mobile networks]/[Access Point Names]/z/[New APN] [Name]/enter the name of the network profile to create/[OK] [APN]/enter the access point name/[OK] Enter other items required by telecommunications carriers/z/[Save]...
Page 13
Setting up Google account, etc. In the home screen, [R]/[Settings]/[Accounts & sync]/[Add account] Select the account type Set up an account The account setup screen appears when an application that requires an account is activated without an account set. Keep a separate memo of the set account and password. Retrieving your Google account password If you forget your Google account password, retrieve it.
Home screen Viewing home screen The home screen appears when the phone power is turned on. You can paste widgets or activate applications by selecting shortcuts or quick menus. The desktop display has five pages, and you can paste shortcuts, widgets or folders in each page. 1 Folder Paste a folder to display the data in the folder quickly and to store shortcuts into the folder.
Slide it to the destination : If you slide it to the end of the page and stop, the previous/next page is displayed and you can move to the previous/next page. : If you slide it to [Q] and stop, a thumbnail is displayed and you can move to other pages by using it. Deleting shortcut/widget/folder If you delete the widgets installed by default, you can download them from the manufacturer’s site.
Page 16
Icon Application Description Messaging Use SMS to send and receive text and multimedia messages (nP. 22). Market Use Android Market to download free and paid applications on your phone (nP. 19). Maps Use Google Maps. You can find your present location, and use the navigation function to get directions to your destination (nP.
Page 17
Icon Application Description News & Weather You can check the weather of present location and view news by category. Downloads Manage data such as images downloaded from sites. ZapitNow Manage mobile internet sites with one swipe. Swype Intro Learn how to use Swype™. Managing pages Adding pages You can add up to 100 pages in the application screen.
Page 18
Screen display/icons Viewing icons Icons displayed on the status bar at the top of the screen give you various kinds of information, such as the status of the phone or the presence of missed calls. You can check the detailed information by displaying the status panel. Two kinds of icons are displayed.
Page 19
Main status icon list Icon Description Alarm set Battery level 8 to =: Approx. 100 to 5% >: Approx. 0% >? ?: Unknown battery level While charging, the battery icon appears with [w] superimposed. Signal strength !: Level 4 #: Level 3 $: Level 2 !#$%&( %: Level 1...
Page 20
Note that SHARP shall not be liable for any malfunction caused by the applications you install. Note that SHARP shall not be liable for any disadvantage brought to you or any third party due to the applications you install. Installing application In the Android Market screen, select an application to download/[FREE]/[OK] Once you accept to install the application, you are responsible for the results of using the application.
Phone Making a call In the home screen, [R]/[Phone] Enter a phone number : Always dial the area code, even when it is a local number. : To adjust the in-call volume: x/y [End] to end the call Note the following when using hands-free. •...
Page 22
Importing/Exporting contacts You can copy contacts from/to other phones using a microSD Card. Importing contacts from a microSD Card Insert the microSD Card with the contacts in advance. In the home screen, [R]/[Contacts]/z/[Import/Export] [Import from SD card] : If you have more than one account, select an account to which you want to import the contact data. : If you have more than one contact data in the microSD Card, select importing method and contact data.
Page 23
Gmail Gmail is a mail service provided by Google. Refer to Gmail website for details on Gmail. In the home screen, [R]/[Gmail] z/[Compose] Enter a destination, a subject, and a message/[#] Displaying mail In the home screen, [R]/[Gmail] : To update Inbox: z/[Refresh] •...
Setting menu In the home screen, [R]/[Settings] to display the menu and set various phone settings. Setting Description Profile You can display the phone number registered in the SIM card and register a name, mail address, etc. Energy saving settings Set to conserve the battery power.
Wireless & networks Change connectivity settings such as Wi-Fi and Bluetooth. In the home screen, [R]/[Settings]/[Wireless & networks] Select an item Flight mode: Restricts the use of all functions which require network communication, such as calls/mail functionality. Wi-Fi: Enable Wi-Fi function. settings: For details nP.
Page 26
Sound Set ring tone, operation sound, etc. In the home screen, [R]/[Settings]/[Sound] Select an item Silent mode: Set to avoid disturbing others when in public. Vibrate: Set whether to enable vibration for incoming calls. Volume: Set the volume of ring tone, media play sound, etc. •...
USB connection Change the settings for connecting the phone to a PC using the microUSB cable SH10. In the home screen, [R]/[Settings]/[USB connection] Select an item USB battery charge: Charge the phone while it is connected to a PC via the microUSB cable. USB connection mode: Change the mode set when connecting the phone to a PC.
Page 28
Accounts & synchronisation You can synchronise data between the phone and online services. You can access personal information stored in online services from the phone and PC, and you can use and update data by synchronising them. In the home screen, [R]/[Settings]/[Accounts & sync] Select an item Background data: Allow all applications to automatically perform data communication.
Do not use simple or predictable numbers for security codes such as “birthdays”, “phone numbers”, “address or room numbers”, “1111” or “1234”, etc. Keep a separate memo of security codes. Keep security codes private. If the security codes are found and improperly used by others, SHARP shall not be liable for any loss of the user’s. Lock No. (for various functions) Lock No.
Browser Displaying sites This phone can display sites over packet communication or Wi-Fi connection. In the home screen, [R]/[Internet] Some sites may not appear properly. Searching sites In the browser screen, touch a search box Enter the URL/keyword : Display a list of URLs that start with the entered characters or sites that include the entered characters. Select the search result : Alternatively, [I] after entering whole URL/keyword.
Camera Before using camera Fingerprints or oil on the lens may cause the image to be out of focus. In addition, images may blur and rays of light may appear in images when shot near a strong light source. Wipe the lens with a soft cloth before shooting images. You cannot shoot when battery level is insufficient.
Page 32
Shooting screen layout Picture shooting screen Video camera shooting screen 1 Remaining number of pictures/time which can be shot Even after shooting a picture, remaining number of pictures/time which can be shot may not have changed. 2 Focus settings 3 Switch 2D/3D shooting Switch 2D/3D shooting.
Camera Shoot a picture. In the home screen, [R]/[Camera] : Alternatively, G (for at least 1 second) in the home screen. : To adjust the brightness: Flick up/down : Zoom: Flick to the left/right : Focus lock: Tap the subject •...
If the file is not displayed, the file may be displayed correctly by deleting a database file of Picture (3D-capable). Connect the phone with a microSD Card inserted to a PC using microUSB cable SH10 and delete \PRIVATE\SHARP\PM\DATABASE folder in the microSD Card to use. If you delete the database file, created information of people etc.
Page 35
Music Play music data and playlist saved in a microSD Card. In addition, playing music in the background is available while using mail, browser, etc. In the home screen, [R]/[Music] Select data : To adjust the volume of play sound: x/y Music playback screen layout 1 Jacket image 2 Artist’s name/Album title/Title...
Contents manager You can manage the data saved in the microSD Card, classify the data by types and display it. In the home screen, [R]/[Contents Manager] : Select the category on the bottom of the screen to display the data of selected category. When a corresponding application has already been downloaded, select the data to display it.
Bluetooth settings Enable Bluetooth function in advance (nP. 24). To register/connect a Bluetooth device, the Bluetooth passkey may need to be entered. Before starting the registration, decide the 1- to 16-digit number. Enter the same number on the phone and the other party’s Bluetooth device. In the home screen, [R]/[Settings]/[Wireless &...
External connector device Connecting the phone and PC Insert the phone side connector of the microUSB cable SH10 horizontally into the external connector terminal on the phone Insert the PC side connector of the microUSB cable horizontally into the USB connector on the PC (2) : For details on setting USB connection mode nP.
Home network settings Using the Wi-Fi connection, you can view pictures and listen to music stored on the phone or microSD card with a TV compliant to the home network. Set up the Wi-Fi connection before using the home network server. For details on Wi-Fi nP. 11 To connect to the phone with a TV compliant to the home network, please refer to the manual of the TV compliant to the home network.
[Use GPS satellites]) to measure the present location (nP. 26). You cannot use the phone as a navigation system for professional use of aircrafts, vehicles, person, etc. or surveying GPS of high accuracy. Note that SHARP shall not be liable for the pure economic loss caused by using the GPS for these purposes or other purposes such as you cannot confirm the positioning (communication) result due to phone failure, malfunction or external factors such as power failure (including battery exhaustion).
Compass Display a map and compass to check your present location and the direction the phone is facing. There are two modes for checking: a compass mode which shows the direction of the phone with a compass and a map mode which shows the direction of the phone with an azimuth icon on the map.
Stopwatch In the home screen, [R]/[Clock]/[StopWatch] [Start] : To record the lap time and split time: [Lap] [Stop] : To reset measured time and history: [Reset] You can record up to 99 histories of lap time and split time. When the number exceeds 99, they are deleted starting with the oldest. Measured time and history are reset by ending Clock.
Troubleshooting (FAQ) If there is no improvement of the problems even after checking the following items, please contact the number listed in “General enquiries” of this manual. Troubleshooting Power Power does not turn on Is the battery pack attached properly? P.
Sound The other party’s voice is not heard well or is too loud during phone call Make sure you did not change the in-call volume. P. 20 Mail Mail is not automatically received Make sure Inbox check frequency in Account settings of Email is not set to [Never]. P.
OS version upgrade For the OS version upgrade method, refer to “Manual for USB Driver Installation” in PDF format on http://www.sharp-phone.com/. Download the software update and the USB drivers to the PC. Set the phone to USB connection mode (nP. 26): [Fast transfer mode]. Connect the phone to the PC using the microUSB cable SH10.
However, the security may not be sufficient depending on the configuration. Take care of the security while making communication using Bluetooth function. Even if any leak of data or information occurs while making communication using Bluetooth function, SHARP shall not be liable for any loss of content.
XP Home Edition operating system. The Bluetooth word mark and logos are owned by the Bluetooth SIG, INC. and any use of such marks by SHARP is under license. Other trademarks and trade names are those of their respective owners.
Page 48
“AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. Support on the web Visit our support website (www.sharp-phone.com/) from your computer to get the most from your phone. General enquiries United Kingdom Sharp Telecommunications of Europe, Ltd.
Page 49
Index This index lists function names and words summarising the description in alphanumeric order. Numerics Clear storage ..........26 Compass .
Page 50
Import contacts ..........21 Video Camera.