Renault 2013 Clio Handbook page 27

FRONT HEADRESTS
B
2
To raise the headrest
Raise the headrest to its highest po-
sition (tilt the seatback backwards if
necessary). Press button 2 and lift the
headrest to release it.
Note: when the headrest is removed,
take care not to change the positions
of rods 3.
(2/2)
To refit the headrest
If the rod setting has been altered, pull
rods 3 out fully (check that they are
properly aligned and clean). If you are
having difficulty, check that the notches
are facing the front.
Insert the headrest rods into the holes
(tilt the seatback backwards if neces-
3
sary).
Lower the headrest until it locks, press
button 1 and lower the headrest as far
as possible.
Check that each rod 3 on the seatback
is securely locked.
The headrest is important
for safety. Ensure that it is in
place and in the correct po-
sition: the top of the head-
rest should be as close as possible
to the top of the head and there must
be a minimal distance between the
head and the headrest B.
1.21