Nikon F60 Instruction Manual page 21

Shooting in Each Exposure Mode
P: Auto-Multi Program
The camera automatically controls your
exposure to achieve a correct exposure in
any shooting situation. For more complex
shooting, use Flexible Program (below) or
exposure compensation (page 50).
For other available mode combinations,
see page 64.
1 Set the exposure mode dial to P.
2
Confirm focus indicator u and shoot.
• When the subject is too dark or bright, one of the following warning
indications will appear in the viewfinder or LCD panel .
⁄
• : Use ND filter.
¤
• : Use Speedlight.
NOTE: Flexible Program
In Auto-Multi Program, by rotating the
Command Dial you can change the
combination of shutter speed and
aperture while maintaining a correct
exposure. With this function, you can
shoot in Auto-Multi Program as though
shooting in Shutter-Priority Auto or
Aperture-Priority Auto. f appears in the LCD panel when the Flexible
Program is used. To cancel the Flexible Program, reset the shutter
speed-aperture combination to the original value, change the exposure
mode, turn off the main switch, or use the built-in Speedlight (page 28) or
perform Two-Button Reset (page 57).
40
—continued
S: Shutter-Priority Auto
Enables you to manually set your desired
shutter speed (30-1/2000 sec.); the camera
automatically selects the proper aperture to
provide a correct exposure. With high
shutter speeds, you can freeze the motion
of a fast-moving subject; with slower
speeds, you can create a motion effect.
For available mode combinations, see page
64.
1
2
Set the exposure mode dial to S and set the shutter
speed (30-1/2000 sec.) with the Command Dial.
Confirm focus indicator u and shoot.
• When the subject is too dark or bright, one of the following warning
indications will appear in the LCD panel or viewfinder.
⁄
• : Select higher shutter speed. If the warning indication still remains on,
use ND filter.
¤
• : Select a slower shutter speed. If the warning indication still remains
on, use Speedlight.
• When ‚ blinks in the LCD panel and viewfinder, shutter speed is set to
Long Time Exposure. Change the shutter speed from Long Time
Exposure. For Long Time Exposure, see page 44.
41