Checking Jumper Settings; Setting Jumpers - Acer imedia S3811 Service Manual

Checking Jumper Settings

This section explains how to set jumpers for correct configuration of the motherboard.
Do not over-tighten the screws as this can stress the motherboard.

Setting Jumpers

Use the motherboard jumpers to set system configuration options. Jumpers with more than one pin are
numbered. When setting the jumpers, ensure that the jumper caps are placed on the correct pins.
The illustrations show a 2-pin jumper. When the
jumper cap is placed on both pins, the jumper is
SHORT. If you remove the jumper cap, or place
the jumper cap on just one pin, the jumper is OPEN.
This illustration shows a 3-pin jumper. Pins 1
and 2 are SHORT
76
SHORT OPEN