Edimax 24 10 User Manual page 48

Updating Firmware to the flash interface
After a while, the message shows as below to indicate the user that the update
process is complete.
Update Complete message on web
As for TFTP firmware update, users can get into the command prompt window to
proceed. The command prompt window can be opened by entering "cmd"
(without quotes) into Start-Run or through Start-All Programs-Accessories. A
black and white window (the colors can be changed) containing the command
prompt will open. Type in "tftp -i 192.168.2.1 put xxx.bin" (xxx means the file
42