3. To swap the main screen and sub-screen video sources, press and hold the P-in-P button for at
least three seconds.
4. Press the P-in-P button again to close the sub-screen and resume normal projection.
Available Picture in Picture Options
Parent topic:
Available Picture in Picture Options
You can adjust the following options by pressing the Menu button on the remote control while Picture in
Picture mode is active:
Setting
Subscreen Size
Subscreen Position
Swap Main/Sub
Exit Picture in Picture
Parent topic:
Using Basic Projector Features
Description
Adjusts the size of the sub-screen
Adjusts the location where the sub-screen is displayed
Switches the video source displayed on the main screen with the
source displayed on the sub-screen
Closes the sub-screen and resumes normal projection
Using Picture in Picture
59