Charging The 3D Glasses - Epson PowerLite Pro Cinema 4030 User Manual

4. Slide the power switch on the 3D glasses to the On position.
5. Move the glasses within 10 feet (3 m) of the projector, then hold down the Pairing button on the
glasses for at least three seconds.
The status light on the glasses flashes green and red. If pairing is successful, the light turns green
for 10 seconds and then turns off.
Parent topic:

Charging the 3D Glasses

Charge the glasses when the status light on the glasses flashes red to indicate a low battery.
Viewing 3D Images
38