Table of Contents
Advertisement
IMPORTANT: Read the foflowing
notices
before
using
the camera's
builtqn
wireless
transmitter.
This
product,
wffich
contains
encryption
function
developed
in the
United
States, is controlled
by the United
States
Export
Administration
Regulations
and
may
not
be exported
or
re
exported
to any country
to which
the United
States embargoes
goods
• Use onIv as part of a wireless network.
FUJlFILM does
not
accept
liability
for damages
resulting
from unauthorized
use
Do not use
in applications
requiring
a high
degree
of reliability,
for example
in medical
devices
or other systems
that
may directly
or indirectly
impact
human
life
When
using the device
in computer
and other
systems
that
demand
a greater
degree
of reliability
than
wireless
networks,
be sure to take all necessary precautions
to ensure safety
and prevent
malfunction
• Use onlvin
the country in which the device was purchased. This device
conforms
to regulations
governing
wireless
network
devices
in the
country
in which it was purchased.
Observe
all location
regulations
when
using
the
device
FUJlFILM does
not
accept
liability
for
problems
arising from use in otherjurisdictions
• Wireless data (imaqes) mav be intercepted by third parties. Th e secu rit y
of data transmitted
over wireless networks
is not guaranteed
• Do not use the device in locations
subject to maqnetlo
fields, static
electricity,
or radio interference.
Do not
use the
transmitter
in
the
vicinity
of microwave
ovens
or in other
locations
subject
to
magnetic
fields,
static
electricity,
or radio interference
that
may
prevent
reception
of wireless
signals.
Mutual
interference
may
occur
when
the transmitter
is used in the vicinity
of other wireless
devices
operating
in the 24 GHz band
• The wireless transmitter operates in the 2.4 GHz band usinq DSSSand
OFDM modulation.
I
Wireless Network Devices: Cautions
]
• This device operates on the same frequencv
as commercial, educational,
andmedicaldevloesandwirelesstransmitters.
It also operates
on the
same frequency
as licensed
transmitters
and special unlicensed
low
voltage transmitters
used in RFID tracking
systems for assem bly lines
and in other similar applications
• To prevent interference with the above devices, observe the followiml
precautions.
Confirm
that the
RFID transmitter
is not
RI operation
before
using
this
device
Should
you
observe
that
the
device
causes interference
in licensed
transmitters
used for RFID tracking,
immediately
choose
a new operating
frequency
for this device
to
prevent
additional
interference.
If you notice that this device causes
interference
in low voltage
REID tracing
systems, contact
a FUJIFILM
representative
_Z
u,-_/L--/r
I[_.4r_cl_r41
This
sticker
indicates
that
this
device
operates
in the 2.4 GHz band using
DSSS
I_
_
_|
and
OFDM
modulation
and
may cause
[nterference
at distances of up to 40 m
Advertisement
Table of Contents
