s _t g
k__u,r?a_( ;_M<
ovC_
4 Close and latch the battery-chamber
cover.
Holding
the battery-chamber
cover
closed
against
the
camera
body
((_),
rotate
the
latch until
it clicks into place ((_), indicating
that the cover is secure.
(l) Before closing the cover, confirm that there is
no dust, sand, or other foreign matter or] the
water-resistant
seal or adjacent surfaces.
(!) When
closing
tile
battery-chamber
cover, do not subject
it to excessive
horizontal
forces. Failure to observe this precaution
could cause the water-
resistant seal to become misaligned, allowing
water into the camera.
(!) Check that the cover is secure by rotating
the latch in the opposite
direction
and confirming
that tile cover does not open.
::iMake sure that the strap is not caught in the cover and that the
::ilatch is closed.
l
lncorrect
10
::_st