Table of Contents
Advertisement
It-
• When tile side lever is set to H, M or L,tile side lever
functions as same asthe zoom lever.
• When setting tile side lever to H, tile side lever carl
zoom faster than zoom lever. In the same way when
setting the side lever to L, the side lever carl zoom
slower than zoom lever.
• When using the zoom control and side lever simulta-
neously, tile zoom control is activated.
_ Focus Lock
Use focus lock (_
37) to focus on subjects that are not
_@Holding theCamera
iii
Hold the camera steady with
elbowsboth
hands and brace your
[
Shaking against your sides.
;:
or unsteady hands
can blur your shots.
out offocus o rtoodark (un-
derexposed),
keep your fin-
gers and other objects away
from the lens and flash.
in the focus frame.
Autoback zoom
Irlthesetupmenu(_
104),youcarlcharlgethesetting
'
If the subject is poorly lit, blurring caused by camera
of the side lever. Select [] SIDE ZOOM LEVERthen
I shake can be reduced using the []
DUAL IS MODE
AUTO BACK to enable auto back zoom. Auto back
option in the setup menu (_
106).In I_1 mode, blur
zoom allows the camera to zoom out and in quickly,
caused by subject movement is also reduced (dual
It makes it easy to find the lost subject when zoom-
IS mode).
!!]:
Sensitivity is raised when dual ISis in effect. Note that
blurring may still occur depending on the scene. We
recommend
that you turn dual IS off when using a
tripod.
18
Advertisement
Table of Contents
