Maintenance; Cleaning The Plasma Display; Warning - Sylvania 6842PE Owner's Manual

Funai owner's manual plasma flat panel tv 6842pe

Hide thumbs Also See for 6842PE:

Table of Contents

AINTENANCE

Always unplug the plasma display from the AC

outlet before cleaning.

Clean the case of the plasma display with a soft

cloth which has been wet and wrung dry.

If the screen of the plasma display is dirty or

dusty, wipe it clean with a soft cloth.

ARNING

Preventing Image Burn on the plasma display

Fixed images displayed on the plasma display for an extended period of several hours may cause

uneven pixel aging causing damage to the plasma display. The screensaver mode helps reduce this

phenomenon, but in general you should to try avoid displaying fixed images for extended periods on

the plasma display.

Images of high luminance displayed on the plasma display for more than 60 seconds may cause lin-

gering images to remain on the screen. These images will automatically disappear, but may take

time depending on the luminance of the images and how long they were displayed on the screen.

NOTE:

Never use a solvent, alcohol or any other abrasive liq-

uid to clean the plasma display.

Always make sure the area around vents on the plas-

ma display is clear and clean. Failure to do this may

result in fire or cause the plasma display to fail prema-

turely.

Table of Contents