Replacing The Processor - Dell XPS 730X Service Manual

Replacing the Processor

WARNING:
shipped with your computer. For additional safety best practices information, see
the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Do not perform the following steps unless you are familiar with
hardware removal and replacement. Performing these steps incorrectly could
damage your system board. For technical service, see the
1 Follow the procedures in "Before You Begin" on page 13.
2 Remove the computer cover (see "Replacing the Computer Cover" on
page 17).
WARNING:
hot during normal operation. Be sure that it has had sufficient time to cool before
you touch it.
3 Disconnect the power cables from the ATX_POWER and ATX_CPU
connectors (see "System Board Components" on page 8) on the system
board.
4 Remove the processor fan and heat sink assembly from the computer (see
"Replacing the Processor Fan Assembly" on page 79).
NOTE:
original heat sink assembly when you replace the processor.
5 Press and push the release lever down and out to release it from the tab
that secures it.
6 Open the processor cover, if applicable.
Before working inside your computer, read the safety information that
Despite having a plastic shield, the heat sink assembly may be very
Unless a new heat sink is required for the new processor, reuse the
Setup Guide
Replacing the Processor
10
.
73