Repeat / Random / Programmed Playback; Repeat Playback; Repeat A-B Playback; Random Playback - TruTech DV220TT8 Owner's Manual

Repeat / Random / Programmed Playback

Repeat Playback

You can repeat playback chapters, titles or tracks on a disc.
Repeat function is available only during playback.
1 Press [REPEAT] during playback.
REPEAT
PLAY
Each time you press [REPEAT], repeat function changes as exam-
ple below.
OFF
CHAPTER
TITLE
OFF
TRACK
ALL
OFF
TRACK
GROUP
ALL
Note:
• Repeat setting (except "ALL") will be cleared when moving to another
title, chapter, track/file or folder.
• This function is not available with some discs or during repeat A-B
playback.

Repeat A-B Playback

DVD DV
You can repeat playback between A and B on a disc.
Repeat function is available only during playback.
Press [A-B] at your desired starting point (A).
1
A-B
PLAY
2 Press [A-B] at your desired ending point (B).
A-B
• Point B should be in the same title or track as point A.
Note:
• To exit the sequence, press [A-B] so that "OFF" appears.
• To cancel point A, press [CLEAR/C.RESET] at step 1.
• This function is not available in the other repeat modes.
DVD DV
e.g.) DVD
(repeat off)
(current chapter repeat)
(current title repeat)
(repeat off)
(current track repeat)
(entire disc repeat)
(repeat off)
(current file repeat)
(current folder repeat)
(entire disc repeat)
A-
A-B
– 18 –

Random Playback

DV DVD
This function shuffles the playing order of tracks instead of playback
in sequence.
1 Press [MODE] twice.
MODE
STOP
Press [PLAY B] to start random playback.
2
PLAY
Note:
• To repeat the current track in the random mode, press
[REPEAT] repeatedly until " TRACK" appears during playback.
• To repeat the entire random selections, press [REPEAT] repeatedly until
" ALL" appears during playback.
• During random playback, you cannot go back to the previous track.

Programmed Playback

DVD DV
You may determine the order in which tracks will play back.
Press [MODE] once.
1
MODE
STOP
Using [K / L] to select desired track.
2
Press [ENTER].
ENTER
or
• Up to 99 tracks can be programmed.
• If eight or more tracks were in a program,
use [SKIP H, G] to see all the tracks.
• While an MP3 folder is open:
– Press [B] when you want to go to the next hierarchy.
– Press [s] when you want to go back to the previous
hierarchy (except for the top hierarchy).
Press [PLAY B] to start programmed playback.
3
PLAY
Note:
• Press [CLEAR/C.RESET] at step 2 to erase the most recently entered
track.
• To erase all programmed tracks at once, select "ALL CLEAR'' and press
[ENTER] at step 2.
• While a program is being played back, [STOP C] works as follows;
- Press [STOP C] and [PLAY B] next, so that the programmed
playback restarts. (CD playback restarts from the current point. MP3
playback restarts from the beginning of the current file.)
- Press [STOP C] twice and [PLAY B] next, so that playback restarts
from the first track in the original order. However, your programmed
playback can be restarted when you follow the above steps. (Your
programs are still stored until either the disc tray is open or power is
turned off.)
• To repeat the current track in the program, press [REPEAT] repeatedly
until " TRACK'' appears during playback.
• To repeat the entire program, press [REPEAT] repeatedly until
" ALL'' appears during playback.
RANDOM
CD-DA TOTAL 0:45:55
RANDOM PROGRAM
--no indication--
PLAY
e.g.) CD
CD-DA TOTAL 0:00:00
e.g.) CD
CD-DA TOTAL 1:03:30
1 3:30
5 5:10
10 4:20
11 3:00
12 3:20
17 4:10
22 2:50
2/3
EN