Table of Contents
Advertisement
3
Select "ONCE", "DAILY" (Mon-Fri), or "WEEKLY".
Then press [B] to go to next step.
or
Select the desired date.
4
Then press [B] to go to next step.
or
or
• You can program the unit to record up to 8 programs, within a
year in advance.
5
Select the desired starting time (hour).
Then press [B] to go to next step.
or
or
6
Select "AM" or "PM".
Then press [B] to go to next step.
or
7
Repeat the procedure in steps 5 and 6 to set the ending time.
8
Select "L1" or "L2".
Then press [B] to go to next step.
or
Notes for Timer Recording & One-touch Timer Recording (OTR)
• If a cassette tape is not in the unit or does not have the erase-protection tab,
be performed. Please insert a recordable cassette tape.
• When timer recordings are set,
so that
indicator lights off.
After an one-touch timer recording or a timer recording has been set, this unit operates as follows:
• If a cassette tape runs out before an one-touch timer recording or a timer recording is finished, the unit ejects the cassette tape. Press
on the remote control or
[T-SET]
• Once the unit turns to the timer standby mode, no VCR functions are available until
• To cancel the timer standby mode, press
the VCR function again.
When an one-touch timer recording or a timer recording is completed...
• If auto power off for DVD has been activated and there are timer recordings on standby, the unit turns off automatically, and
indicator on this unit lights to indicate the unit is in the timer standby mode.
•
indicator on this unit flashes if there are no more timer recordings on standby.
• If auto power off for DVD has NOT been activated, the unit goes to the DVD mode and all the VCR functions will be unavailable. All the
DVD functions are available during one-touch timer recording, timer standby mode and timer recording.
C A
• Press
on this unit or
[STOP/EJECT
]
• Press
on this unit or
[OUTPUT]
standby mode, press
[STOP/EJECT
on the remote control.
[VCR
]
If you want to use the DVD player during a timer recording or while
• Press [POWER] to turn on the unit. Press [DVD
features as described in this manual.
Note for timer recording:
If there is a power failure or the unit is unplugged for more than 30 seconds, clock setting and all timer programs will be lost.
•
EN
PROGRAM NUMBER 1
B ONCE
DAILY
WEEKLY
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE
1 0 / 2 3 TUE
START
TIME – – : – –
END
TIME – – : – –
L1/L2
– –
REC
SPEED – –
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE
1 0 / 2 3 TUE
START
TIME 0 7 : 3 0
END
TIME – – : – –
L1/L2
– –
REC
SPEED – –
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE
1 0 / 2 3 TUE
START
TIME 0 7 : 3 0
END
TIME – – : – –
L1/L2
– –
REC
SPEED – –
B PM
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE
1 0 / 2 3 TUE
START
TIME 0 7 : 3 0
END
TIME 0 8 : 3 0
L1/L2
L1
REC
SPEED – –
indicator on this unit lights up. To use the VCR as usual until the time for the recording, press
C A
on the unit, then press
[STOP/EJECT
]
on the remote control or
[T-SET]
on the remote control to use the VCR when the unit is turned off.
[T-SET]
on the remote control to use the VCR when the unit is turned on. In case timer recording is in
[VCR
]
C A
on this unit or
]
[T-SET]
] on the remote control to choose DVD mode, then continue with the other DVD
9
Select recording speed.
Then press [CLEAR/C.RESET].
or
• To set another program after step 9, press [B].
Then continue with step 2.
Press [T-SET] to set the timer standby mode.
10
T-SET
– –
– –
•
indicator on this unit lights up and the unit goes to the DVD
mode.
Note:
• To go back one step, press [s] during steps 3 to 9.
• Select "L1" to activate rear input jacks. Select "L2" to activate front input
jacks.
To check, correct or cancel a timer program
– –
– –
1) Press [T-SET] then, [VCR
2) Press [SETUP] to call up the main menu.
3) Select "TIMER PROGRAMMING" by using [K / L], then press
[B].
4) Select the program number which you want to check by
using [K / L]. The details of the program you selected will
PM
appear on the TV screen.
– –
• Go to the digit you want to change by using [s / B]. Then,
AM
enter correct numbers by using [K / L].
• You may cancel the entire program by pressing [s] while
the program number blinks.
5) Press [CLEAR/C.RESET] to exit.
6) Press [T-SET] to return to the timer standby mode.
To cancel a timer recording in progress
PM
PM
Press [STOP/EJECT C A] on the unit.
indicator on this unit blinks and timer recording cannot
to activate the VCR function again.
[VCR
]
is pressed.
[T-SET]
C A
on the unit, then press
[STOP/EJECT
]
on the remote control, and then press
indicator on this unit is on or blinking.
– 13 –
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE
1 0 / 2 3 TUE
START
TIME 0 7 : 3 0
END
TIME 0 8 : 3 0
CLEAR/
C. RESET
L1/L2
L1
REC
SPEED SP
B SP
SLP
] on the remote control.
[T-SET]
to activate
[VCR
]
on this unit or
[OUTPUT]
PM
PM
Hide quick links:
Advertisement
Table of Contents
