Advertisement
Preparing to Print
_
PictBridge
_i
lay back the image.
® Press the <[_]>
button.
_y,, T he image will appear, and the <?'_'>
icon will appear on the upper left to
indicate that the camera is connected
to a printer.
U
Before using the printer, make sure it has a PictBndge
connection
poE.
Movies cannot be printed.
The camera cannot be used with printers compatible
only with CP Direct
or Bubble Jet Direct
Do not use any interface cable other than the one provided.
If there is a Eongbeeping sound in step 5, it indicates
a problem with the
printer. Resolve the problem displayed
in the error message
(p.288).
Printing is not possible if the <[]>
or <,_:'> shooting mode or Multi Shot
Noise Reduction has been set
You can also print _
images taken with this camera.
If you use a battery pack to power the camera, make sure it is full}
charged. With a fully-charged
battery, printing up to approx. 3 hr. 30 min
is possible
Before disconnecting
the cable, first turn off the camera and printer. Hold
the plug (not the cord) to pull out the cable.
For direct printing, using AC Adapter Kit ACK-E8 (sold separately)
to
power the camera is recommended.
281
Advertisement
