Repeat / Random / Programmed Playback; Repeat Playback; Repeat A-B Playback; Random Playback - Magnavox MSD125 Owner's Manual

Repeat / Random / Programmed Playback

Repeat Playback

DVD-V DVD-V CD CD
Repeat function is available only during
playback.
1
1
PLAY
REPEAT
Each time you hit [REPEAT], repeat
function changes as example below.
DVD-V DVD-V
(current chapter repeat)
CHAPTER
(current title repeat)
TITLE
OFF (repeat off)
CD CD
(current track repeat)
TRACK
(entire disc repeat)
ALL
(repeat off)
OFF
Hint
Hint
• Repeat setting will be cleared when mov-
ing to another title, chapter, or track.
• Repeat playback may not function with
some discs or during repeat A-B playback.

Repeat A-B Playback

DVD-V DVD-V CD CD
1
1
PLAY
A-
A-B
at your desired starting point (A)
2
2
A-B A-B
at your desired end point (B)
Point B should be in the same title or
•
track as point A.
Hint
Hint
• To exit the sequence, hit [A-B] so that
OFF appears.
• To cancel Point A, hit [CLEAR].
• This function does not work in the other
repeat modes.

Random Playback

This function shuffles the playing
order of tracks instead of playback
in the sequence.
CD CD
1
1
STOP
RANDOM
CD-DA
RANDOM PROGRAM
--no indication--
MODE
PLAY
Hit twice .
<Example: CD>
2
2
PLAY
Hint
Hint
• To repeat the current track in the random
selections, hit [REPEAT] repeatedly until
" TRACK" appears during playback.
• To repeat the entire random selections, hit
[REPEAT] repeatedly until "
appears during playback.
– 12 –

Programmed Playback

CD CD
You may determine the order in which
tracks will play.
1
1
STOP
MODE
Hit once.
2
2
or
ENTER ENTER
3
3
PLAY
Hint
Hint
• Hit [CLEAR] at step 2) to erase the most
recently entered track.
TOTAL 0:45:55
• To erase all programmed tracks at once,
select "ALL CLEAR'' and hit [ENTER] at
step 2).
• While a program is being played back,
[STOP C C ] works as follows;
⇒ Hit [STOP C C ] and [PLAY B B ] next, so
that the programmed playback restarts.
⇒ Hit [STOP C C ] twice and [PLAY B B ] next,
so that playback restarts from the first
track in the original order. However, your
programmed playback can be restarted
when you follow the above steps. (Your
programs are still stored until either the
disc tray is open or power is turned off.)
• To repeat the current track in the program,
hit [REPEAT] repeatedly until "
appears during playback.
ALL"
• To repeat the entire program, hit [REPEAT]
repeatedly until "
playback.
CD-DA TOTAL 0:00:00
ENTER
<Example: CD>
TOTAL 1: 03: 30
1 3:30
5 5:10
10 4:20
11 3:00
12 3:20
17 4:10
22 2:50
1/4 2/3
• Up to 99 tracks can be
ordered.
• If eight or more tracks were in a
program, use [SKIP H H , G G ]
to see all the tracks.
TRACK''
ALL'' appears during
EN