1
screw
2
AC adapter connector
3
AC-adapter connector cable
Replacing the AC-Adapter Connector
1. Follow the instructions in
Before You
2. Align the screw hole on the AC-adapter connector with the screw hole on the top cover.
3. Replace the screw that secures the AC-adapter connector to the top cover.
4. Route the AC-adapter connector cable through the routing guide.
5. Connect the AC-adapter connector cable to the system-board connector.
6. Follow the instructions from
7. Replace the display assembly (see
8. Replace the keyboard (see
9. Replace the palm-rest assembly (see
10. Follow the instructions from
11. Replace the hard drive (see
12. Replace the Mini-Card(s) (see
13. Replace the memory module(s) (see
14. Replace the battery (see
Replacing the
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Back to Contents Page
Begin.
step 9
to
step 11
in
Replacing the Top
Replacing the Display
Assembly).
Replacing the
Keyboard).
Replacing the Palm-Rest
step 5
to
step 6
in
Replacing the Optical
Replacing the Hard
Drive).
Replacing the
Mini-Card(s)).
Replacing the Memory
Module(s)).
Battery).
Cover.
Assembly).
Drive.