Configuring Mac Authentication - D-Link Unified Access System DWS-3000 Series User Manual

D-Link Unified Access System User Manual

Configuring MAC Authentication

For each network, you can configure whether to use a local or RADIUS database for client
MAC authentication. To use RADIUS-based MAC authentication for wireless clients, you add
an entry for each client in the
Authentication on the switch is set to "Allow," only clients that have an entry in the
are allowed access to the network through the AP. If the default action is set to "deny" the
clients with a MAC address in the
The following line is an example of an entry for a client in the
00-0F-FE-1C-F2-67 Auth-Type: = Local, User-Password == "NOPASSWORD"
NOTE:
186 © 2001- 2006 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
etc/raddb/users
The password is always NOPASSWORD, and the MAC address of the client
uses hyphens, not colons.
file. If the default action for MAC
file cannot authenticate with the AP.
users
users
file.
etc/raddb/users
file