Subtitle 4 5; About The Remote Control; Remote Control; Installing The Batteries For The Remote Control - FUNAI Philco DP100HH8 Owner's Manual

About the Remote Control

Remote Control

OPEN/CLOSE
STANDBY-ON
SEARCH
DISPLAY MODE
AUDIO
1 2 3
SUBTITLE
4 5 6
ANGLE
7 8 9
REPEAT CLEAR
0 +10
A-B PAUSE SKIP
SLOW
PLAY
REV FWD
STOP
SETUP TOP MENU MENU
MODE ENTER
ZOOM RETURN
Installing the Batteries for the
Remote Control
Install batteries (AA x2) matching the
polarity indicated inside battery com-
partment of the remote control.
1
2
Keep in mind the following when using
the remote control:
• Make sure that there are no obstacles
between the remote control and the
remote sensor on the unit.
• The maximum operable ranges from
the unit are as follows.
- Line of sight:
approx. 23 feet (7m)
- Either side of the center:
approx. 16 feet (5m) within 30°
- Above: approx. 16 feet (5m) within 15°
- Below: approx. 10 feet (3m) within 30°
OPEN/CLOSE
Note:
• Do not mix alkaline and manganese
batteries.
• Do not mix old and new batteries.
• Always remove batteries from
remote control if they are dead or if
the remote control is not to be used
for an extended period of time. This
will prevent battery acid from leaking
into the battery compartment.
Media
Button
order)
(Alphabetical
1 2 3
4 5 6
7 8 9
0 +10
ENTER
A-B
ANGLE
AUDIO
CLEAR
DISPLAY
REV FWD
MENU
MODE
OPEN/CLOSE
3
PAUSE
PLAY
REPEAT
RETURN
SEARCH
MODE
SETUP
SKIP
P-SCAN
PLAY STOP POWER
STANDBY-ON
STOP
SUBTITLE
TOP MENU
ZOOM
• To select chapter or title
directly.
• To move the cursor and deter-
mine its position.
• To repeat between your cho-
sen point of A and B.
• To select camera angles on
a disc.
• To select audio language on
a disc.
• To remove status number in
program input.
• To clear the numbers entered
incorrectly.
• To cancel the point for A-B
repeat.
• To display the current disc
mode.
• To search forward/backward
through a disc.
• To begin slow forward play-
back in the pause mode.
• To call up the menu on a disc.
• To arrange the playing order
or play randomly.
• To set black level on/off.
• To set virtual surround on/off.
• To open or close the disc tray.
• To turn on the unit.
• To pause disc playback.
• To advance playback one
frame at a time.
• To begin disc playback.
• To turn on the unit.
• To play back a chapter or title
repeatedly.
• To return to the previous
operation in menu.
• To search chapter, title or
time.
• To call up the setup menu.
• To skip chapters or titles.
• To turn the unit on/off.
• To stop playback.
• To select subtitles on a disc.
• To call up the top menu on
a disc.
• To magnify part of a picture.
(x2 / x3 / x4 / x1/2)
– 8 –
• To select track directly. (CD)
• To select folder/file directly.
(MP3)
• To move the cursor and deter-
mine its position.
• To repeat between your cho-
sen point of A and B.
------
• To select "STEREO", "L-ch" or
"R-ch". (CD)
• To remove status number in
program input.
• To clear the numbers entered
incorrectly.
• To cancel the point for A-B
repeat.
• To display the current disc
mode.
• To search forward/backward
through a disc.
------
• To arrange the playing order
or play randomly.
• To set virtual surround on/off.
• To open or close the disc tray.
• To turn on the unit.
• To pause disc playback.
• To begin disc playback.
• To turn on the unit.
• To play back a track or disc
repeatedly. (CD)
• To play back a file, folder or
disc repeatedly. (MP3)
• To return to the previous
operation in menu.
• To search tracks.
• To search time. (CD)
• To search folders. (MP3)
• To call up the setup menu.
• To skip tracks. (CD)
• To skip folders or files. (MP3)
• To turn the unit on/off.
• To stop playback.
------
------
------
EN