Removing The Usb/Audio Board - Dell Inspiron 1564 Service Manual

Back to Contents Page
USB/Audio Board
Dell™ Inspiron™ 1564 Service Manual
Removing the USB/Audio Board
Replacing the USB/Audio Board
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface.
CAUTION: To help prevent damage to the system board, remove the main battery (see
computer.
Removing the USB/Audio Board
1. Follow the procedures in Before You
2. Remove the battery (see Removing the
3. Remove the optical drive (see
4. Remove the module cover (see
5. Remove the power button panel (see
6. Remove the keyboard (see
7. Remove the palm rest (see
8. Lift the connector latch and slide the USB/audio cable out of the connector on the USB/audio board.
9. Remove the screw that secures the USB/audio board to the computer base.
10. Lift the USB/audio board and ease the USB and audio connectors out of the computer base.
1 USB/audio cable
3 connector on USB/audio board
5 screw
Replacing the USB/Audio Board
Begin.
Battery).
Removing the Optical Drive).
Removing the Module Cover).
Removing the Power Button
Removing the Keyboard).
Removing the Palm Rest).
2 connector latch
4 USB/audio board
Removing the
Panel).
Battery) before working inside the