Arranging The Speaker Cables When Assembling The Sw Led Mdc Pcb; Setting The Wireless Lan Module, Bios Pcb And Robson Cover - Panasonic Toughbook CF-52EKMxDxM Service Manual

Arranging the Speaker Cables when assembling the SW LED MDC PCB.

S1:Insulation S2:Bitten S3:Sharp Edge
CAUTION
S4:Part No. Check S5:Other
Torque of tightening screw:0.2 0.02N m( 2.0 0.2kgf cm)
Detailed of portion B
SP CABLE is under of PWB.

9.2.23. Setting the Wireless LAN Module, BIOS PCB and ROBSON Cover

1. Put the Wireless LAN Module into the connector at an angle of fourty-five degrees.
2. Attach the BIOS PCB to the MAIN HIGH PCB, fix it using the two Screws <N2>.
3. Set the ROBSON Cover, and fix it using the Screw <N3>.
Screw <N2> : DFHE5122YA
Screw <N3> : DRHM0065ZA
S2
ROBSON cover
<N2>
BIOS PCB
Wireless
LAN module
SP CABLE R is on the post.
Detailed of portion A
PWB SW
<N3>
<N2>
Cables
(Gray and blue)
9-40
SCREW