Setting The Sc Relay Pcb And Hdd Hold Plate - Panasonic Toughbook CF-52EKMxDxM Service Manual

9.2.6.

Setting the SC RELAY PCB and HDD Hold Plate

1. Set the SC REALY PCB to the HDD Hold Plate, and fix it using two Screws <N2>. No.1, No.2
2. Fix the HDD Hold Plate to the MAIN HIGH PCB using the two Screws <N4>. No.3, No.4
3. Connect the FFC to the Connector(CN6503) and paste the Tape.
Screws <N2> : DFHE5122YA
Screws <N4> : DRHM0093ZA
SC RELAY PCB
<N2>
HDD hold plate
9-17
<N4>
:No.1
CN6503
<N4>
:No.2
Tape
FFC