Horizontal Alignment Function - Brother PT 1950 - P-Touch 1950 B/W Thermal Transfer Printer User Manual

EXAMPLE
To select the HALF tape margin setting:
1
While holding down
and keep
2
While still holding down
E
ing
c
3
Release

HORIZONTAL ALIGNMENT FUNCTION

You can choose to align the text in one of three ways. In addition, if the Length function was
used to set the length of the label, the text will align within the label according to the selected
horizontal alignment setting.
The default horizontal alignment setting is LEFT; however, two other settings are also availa-
ble.
LEFT
CENTRE
To change the horizontal alignment setting:
1 Rotate + until 10/19 ALIGNMENT is displayed, and then press + to display the
current horizontal alignment setting.
38
c
, press
c
held down.
c
until HALF is displayed.
.
E
once,
, continue press-
RIGHT