Installation; Windows™ Xp Vs. Windows Vista; N-Trig Applet - Dell Latitude XT2 Service Manual

Tablet-PC Settings
Dell™ Latitude™ XT2 Service Manual

Installation

The N-trig Tablet Settings applet is built into the driver package. You can either install it directly from the ResourceCD or obtain the latest version from
support.dell.com. Once the file has been extracted, an InstallShield Wizard will walk you through the process of installing the software. The appearance of the
N-trig icon is an indication of a successful installation.
Windows™ XP vs. Windows Vista™
There is only one major difference in the N-trig applet between XP and Vista. On the Digitizer Options tab, under the Input Mode section, there is no listing for
Dual Mode on the XP version. Windows XP does allow use of both pen and touch but the seamless switching capability that Vista offers is not available.

N-trig Applet

The N-trig Tablet Settings applet is used to adjust several settings for the digitizer. Once the N-trig drivers are loaded, an icon appears in the system tray.
Hovering over the icon with your pointer displays the firmware version number. Right-clicking the icon brings up the sub menu below.
Clicking on Properties opens up the N-trig Tablet Settings window.
There are four tabs on the N-trig Tablet Settings window:
Digitizer Options
l
Interaction Options
l
Multi-Touch Gestures
l
About
l