Display Panel - Dell Latitude D800 Service Manual

Display Assembly: Dell Latitude D800 Service Manual
CAUTION: Before performing the following procedures, read the safety instructions
in your System Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or
by periodically touching an unpainted metal surface (such as the back panel) on the computer.
1. Follow the instructions in
2. Remove the central control
3. Remove the display
4. Use a plastic scribe to pry the eight display bumpers out of the screw holes located on the front
of the bezel.
5. Remove the eight M2.5 x 6-mm screws located on the front of the bezel.
NOTICE: Carefully separate the bezel from the top cover to avoid damage to the
bezel.
6. Starting at the bottom of the display panel (by the DELL™ logo), use your fingers to separate
the bezel from the top cover by lifting the inside edge of the bezel away from the top cover.

Display Panel

CAUTION: Before performing the following procedures, read the safety instructions
in your System Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or
by touching an unpainted metal surface on the computer.
1. Follow the instructions in
2. Remove the central control
3. Remove the display
4. Remove the display
5. Remove the nine M2 x 3-mm screws from the display panel.
6. Lift the display panel, and rotate the display panel out of the top cover.
7. Remove the yellow tape from the top display connector.
8. Press in the tabs on both sides of the top display-cable connector, and pull the display cable
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/L...tude/D800/D800%20SERVICE%20MANUAL/display.htm (5 of 7)6/21/2004 2:17:00 AM
"Preparing to Work Inside the
cover.
assembly.
"Preparing to Work Inside the
cover.
assembly.
bezel.
Computer."
Computer."