Page of 3
Download Bookmark Comment
   
Close
Back to Contents Page
Keyboard
Dell™ Latitude™ D800 Service Manual
CAUTION:
Before performing the following procedures, read the safety instructions in your System
Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically
touching an unpainted metal surface (such as the back panel) on the computer.
1. Follow the instructions in
"Preparing to Work Inside the
Computer."
2. Turn the computer right-side up and open it.
1 display
2 center control cover 7T982
3 computer base
3. Remove the center control cover:
a. Open the display all the way (180 degrees) so that it lies flat against your work surface.
b. Starting on the left side of the computer, use a plastic scribe or flat-blade screw driver to pry up the
center control cover.

   Related Manuals for Dell LATITUDE D800

   Summary of Contents for Dell LATITUDE D800

  • Page 1

    Back to Contents Page Keyboard Dell™ Latitude™ D800 Service Manual CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.

  • Page 2

    c. Disconnect the center-control-cover flex cable from the system board connector using the pull-tab. d. Lift the center control cover away from the computer, and lay it aside. 1 center control cover 7T982 2 system board connector 4. Remove the keyboard: a.

  • Page 3

    1 M2.5 x 6-mm screws (2) 4911U 2 US keyboard service kit G1272 3 palm rest 0N037 Back to Contents Page Copyright 1999-2003 Dell Inc. For customers of the 50 United States only.

Comments to this Manuals

Symbols: 0
Latest comments: