Dell Latitude CPt S Service Manual page 32

  %&'% ) +
1. Find the manufacturer's name, either Samsung or IBM/Hitachi, on the
2. If your replacement LCD panel is a Samsung — Install the display bezel clip
3. Install the new flex cable that accompanied the replacement LCD display.
4. Pry the hinge-cover assembly apart from the display assembly, allowing
5. Slide the cable through the opening.
6. Attach the flex-cable retaining clip to the bottom of the hinge cover located
7 .
8. Reinstall the 4-mm screw that secures the metal cable clip to the left hinge
support.dell.com
back of the replacement LCD panel.
(if one is not present) by placing the bezel slot over the hinge tab and
pressing gently until it snaps (see Figure 15).
If your replacement LCD panel is an IBM/Hitachi — Remove the display
bezel clip (if present) by gently prying it up with a small-blade screwdriver
(see Figure 15).
display assembly
bezel
bezel clip
bezel hinge
just enough space for the flex cable to pass through the opening.
at the bottom of the display-assembly hinge cover.
Slide the flex cable under the plastic strain relief retainer located on the
bottom of the display-assembly hinge cover.
of the display-assembly top cover.
Dell Latitude CPt V/CPt S Series and CPx H/CPx J Series Service Manual
bezel slot
hinge tab
23