Dell Inspiron 7000 Service Manual page 99

4-64
This section provides the removal procedure for the audio card and audio
thermal shield.
audio card
This procedure assumes that you have removed the system board from the
plastic case and have removed the PC Card cage from the system board. To
remove the audio card and audio thermal shield, follow these steps (see
Figure 4-44):
1. Gently pull the audio card off of connectors JP12 and JP13 on the system
board. Do not rock the card to remove it, because this may damage the
connectors.
2. Remove the 10-mm screw securing the audio thermal shield, and then
remove the shield.
10-mm screw
audio thermal
shield