Eliminating Resource Conflicts; Getting Help; Running The Dell Diagnostics - Dell Inspiron 7000 Service Manual

NOTE: The computer beeps once shortly after the system boots. This beep is
normal and not part of a beep code.
Any unusual sounds
5. Observe the display for the Diagnostics Menu of the Dell Diagnostics.
Does the Diagnostics Menu appear on the display?
Yes. See "Running the Dell Diagnostics" in Chapter 3.
No. Go to step 6.
6. Insert another copy of the diagnostics diskette into the diskette drive and
reboot the computer.
Does the Diagnostics Menu appear on the display?
Yes. See "Running the Dell Diagnostics" in Chapter 3.
No. Go to the next section, "Eliminating Resource Conflicts."
Devices within or connected to the computer may require dedicated memory
spaces, interrupt levels, and/or DMA channels. Because different devices can
be configured at different times, it is possible that the same resource is
assigned to two or more devices.
Disconnect all peripherals and remove all PC Cards to make sure that the com-
puter failure is not caused by faulty devices.
If you suspect that resource conflicts might exist, check the computer and
reassign the resources as necessary. For more information about resolving
conflicts, see Chapter 3, "Troubleshooting Your Computer," in the Reference
and Troubleshooting Guide .
If none of the procedures in this chapter reveal the source of the problem or
lead to the proper troubleshooting steps for determining the source of the
problem, contact Dell for technical assistance. For instructions, see Chapter 5,
"Getting Help," in the Reference and Troubleshooting Guide or the "Contacting
Dell" section of the online System User's Guide .
Initial Procedures 2-5