Fujitsu Siemens Computers V2030 Getting Started page 27

Keyboard controller error
► Switch the notebook off with the ON/OFF switch.
► Wait 3 - 5 seconds and switch on the notebook again.
If the error message appears repeatedly, please contact the place of purchase or our
hotline/help desk.
Keyboard error
If you use an external keyboard:
► Check the connection and reboot the notebook.
If the error message appears repeatedly, please contact the place of purchase or our
hotline/help desk.
nn Stuck key
► Make sure that no key is pressed.
If the error message appears repeatedly, please contact the place of purchase or our
hotline/help desk.
Press <F1> to resume, <F2> to SETUP.
This error message appears if an error occurs during the self-test before starting the operating
system.
► Press the F1 function key to start the operating system.
► Enter the BIOS Setup Utility by pressing F2 .
Real Time clock error
► Please contact your sales outlet or our Hotline/Help Desk.
nnnnK Shadow RAM failed at offset: xxxx Failing Bits: zzzz
► Please contact your sales outlet or our Hotline/Help Desk.
System battery is dead - Replace and run SETUP
► Please contact your sales outlet or our Hotline/Help Desk.
System cache error - Cache disabled
► Please contact your sales outlet or our Hotline/Help Desk.
nnnnK System RAM failed at offset: xxxx Failing Bits: zzzz
If the error message appears repeatedly, please contact the place of purchase or our
hotline/help desk.
System timer error
► Please contact your sales outlet or our Hotline/Help Desk.
A26391-K183-Z100-1-7619, edition 2
Troubleshooting and tips
19