Buffalo Wireless-G High Speed ADSL2+ Modem Router Manual page 22

two separate AOSS networks at the same time, as this may cause unexpected
configurations.
If an undesired client has connected via AOSS, you may forcibly disconnect it
from the advanced configuration menu.
Basic
The "Basic" tab lets you make changes to the wireless network settings - wire-
less network name (SSID), radio and operating channel.
Wireless Radio
Select Disable to turn off wireless networking, or select the type of wireless
network you are setting up: Mixed (with both 802.11b and 802.11g clients),
B-Only (with only 802.11b clients), or G-Only (with only 802.11g clients). Us-
ing the correct setting here ensures that the network will work as efficiently
as possible.
SSID
Changing the Wireless Network Name (SSID)
To identify your wireless network, a name called the SSID (Service Set Identi-
fier) is used. The default SSID of the Router is "BUFFALO". You can change this
to anything you want to or you can leave it unchanged. If there are other
wireless networks operating in your area, you will want to make sure that
your SSID is unique (does not match that of another wireless network in the
area). To change the SSID, type in the SSID that you want to use in the SSID
field and click "Apply" . The change is immediate. If you make a change to the
SSID, your wireless-equipped computers may also need to be reconfigured to
connect to your new network name. Refer to the documentation of your wire-
less network adapter for information on making this change.
20