Error Displays - Clarion CZ202E Owner's Manual

DISC Player
Problem Cause
Another disc is already loaded.
Disc cannot be
loaded.
There is an object install inside
the unit.
Compact disc is dirty.
Sound skips or is
noisy. Compact disc is heavily scratched
or warped.
Sound is bad Condensation may form on the
when power is first internal lens when the car is
turned on. parked in a humid place.
USB Devices
Problem Cause
The USB device has been
inserted with wrong direction.
USB device cannot
be inserted.
The USB connector is broken. Replace with a new USB device.
The USB device is damaged. Disconnect the USB device and reconnect.
USB device is not
recognized.
Connectors are loose.
No sound heard
No MP3/WMA file is stored in
with the display
the USB device.
"No File" shown.
Sound skips or is MP3/WMA files are not
noisy. encoded properly.
Measure
Eject the disc before loading the new
one.
Remove the object inside the unit.
Clean the compact disc with a soft cloth.
Replace with a compact disc with no
scratches.
Let dry for about 1 hour with power on.
Measure
Reversing the connection direction of the
USB device, try it again.
If the device is still not recognized, try
replacing with a different USB device.
Store these files properly in the USB
device.
Use MP3/WMA files encoded properly.

7. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.
Take the measures described below to solve the problem.
Display Cause
Disc is inserted incorrectly.
ERROR 3
The disc format is not supported.
ERROR 5 This is a failure of deck's mechanism. Consult your store of purchase.
If an error display other than the ones described above appears, press the [RESET] button. If
the problem persists, turn off the power and consult your store of purchase.
* When the [RESET] button is pressed, preset radio stations, titles, etc. stored in memory are
kept.
Measure
Eject the disc then reload it properly.
Try another disc.
CZ202E/CZ202ER/CZ202EG 10