Step 2: Install The Dash Or Window Mount - Audiovox XADV2 User Manual

Vehicle Installation

Step 2: Install the Dash or Window Mount

Depending on your situation, you can either choose to use the Dash Mount or the
Window Mount .
IMPORTANT! When you install the chosen mount, do not attach the dock to the
mount yet . All cables should be attached to the dock prior to connecting the dock
to the mount .
Installing the Dash Mount:
CAUTION! The
not install this mount on leather surfaces (contact your automobile dealership if
you are unsure about your dash surface), and make sure the air temperature is at
least 60ûF (15ûC) during installation . If it's not at least 60ûF, turn on the heater in
your vehicle to bring the temperature up to 60ûF .
1
Locate a flat surface for the Dash Mount . Make sure there is ample
room for the PowerConnect Vehicle Dock and radio when installed .
2
Set the orientation of the Dash Mount before adhering it . Loosen the
knob and adjust the adhesive foot for the location you selected in
"Step 1: Choose a Location for Your Radio" on page 14 .
DASH MOUNT - Option 1 and DASH
MOUNT - Option 2 should be
oriented like the image above .
16
used on the Dash Mount may be difficult to remove . Do
DASH MOUNT - Option 3 should
be oriented like the image above .