Table of Contents
Advertisement
2. Disconnect the blade assembly
from the wiper arm by pushing in
the lock tab. Hold the lock tab in
while you push the blade assembly
toward the base of the arm.
If you are changing the rear wiper
blade, go to step 6.
3. Remove the blade from its holder
by grabbing the tabbed end of the
blade. Pull up firmly until the tabs
come out of the holder.
LOCK TAB
4. Examine the new wiper blades. If
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in the
slots along the edge of the new
blade.
BLADE
5. Slide the new wiper blade into the
6. Slide the wiper blade assembly
7. Lower the wiper arm down against
Wiper Blades
BLADE
REINFORCEMENT
holder until the tabs lock.
onto the wiper arm. Make sure it
locks in place.
the windshield or the hatch glass.
211
Advertisement
Chapters
Table of Contents
