Table of Contents
Advertisement
Relay for Negative (-) Disarm Wire
Relay for Positive (+) Disarm Wire
H1/4 YELLOW (+) ignition output to RF system
As a stand-alone system: The H1/4 YELLOW wire should not be connected to anything.
As an add-on car starter: If connected, disconnect the ignition/accessory input of the remote controlled secu-
rity or keyless entry system. Connect the H1/4 YELLOW ignition output to the ignition/accessory input of the
remote controlled security or keyless entry system. This DEI system will prevent the host system from sensing
that the ignition is on during remote start operation.
H1/5 WHITE (-) light flash output
This wire provides a (-) 200mA output to flash the parking lights during remote start operation. This is suitable
for driving (-) light control wires in Toyota, Lexus, BMW, some Mitsubishi, some Mazda models, etc. If the vehicle
has a positive parking light circuit a relay must be used to flash the parking lights.
(+) Positive Light Flash Output
(-) Light Flash Output
12
© 2000 Directed Electronics, Inc. Vista, CA
Hide quick links:
Advertisement
Table of Contents
