The WLAN device operates in the 2.4GHz ISM band
■
and the 5 GHz lower, middle, and upper UNII bands.
Microwave ovens may interfere with the operation of
■
WLAN devices since they operate in the same 2.4GHz
frequency range as IEEE802.11b/g devices. Interfer-
ence by microwaves does not occur with IEEE802.11a
radio which operates in the 5 GHz RF band.
Wireless devices that transmit in the 2.4GHz range
■
may interfere with operation of WLAN devices in
IEEE802.11b/g modes. Symptoms of interference
include reduced throughput, intermittent disconnects,
and many frame errors. It is HIGHLY recommended
that these interfering devices be powered off to ensure
proper operation of the WLAN device.
DEACTIVATING THE WLAN DEVICE
Deactivation of the WLAN device may be desired in
certain circumstances (to extend battery life) or where
certain environments require it (i.e. hospitals, clinics,
airplanes, etc.).
Deactivation using the Wireless On/Off Switch
The WLAN device can be deactivated quickly and effi-
ciently by sliding the Wireless On/Off Switch to the Off
position (to the left). (Figure A-3)
The wireless On/Off switch has no effect on non-Wire-
less LAN models.
Figure A-2. Access Point (Infrastructure) Mode Network
Internet
ADSL modem,
cable modem,
or similar
Wireless LAN
W i r e l e s s L A N U s e r ' s G u i d e
Figure A-3. Wireless LAN/Bluetooth On/Off Switch
ACTIVATING THE WLAN DEVICE
Activation of the WLAN device can be accomplished
using the same methods as the deactivation process
Using the Wireless On/Off Switch
■
In Windows, by right-clicking the WLAN icon then
■
clicking "Connect to a network"
Wired LAN
Access Point*
*An optional hub for a wired
LAN may be required depending
upon the type of access point used.
85