Modem Problems; Problem; Usb Device Problems; Pc Card Problems - Fujitsu LifeBook A6025 User Manual

L i f e B o o k A 6 0 0 0 S e r i e s N o t e b o o k - S e c t i o n F i v e

Problem

Modem Problems

Messages about modem
operation.

USB Device Problems

You have installed a USB
device that your LifeBook
notebook does not recog-
nize, or the device does not
seem to work properly.
PC Card/ExpressCard Problems
A card inserted in the card
slot does not work or is
locking up the system.

Power Failures

You turn on your LifeBook
notebook and nothing
seems to happen.
48
Possible Cause
Modem operation messages
are generated by whichever
modem application is in use.
The device is not properly
installed.
The device may have been
installed while an application
was running, so your notebook
is not aware of its installation.
Your device may not have the
correct software driver active.
You may have the wrong I/O
address selected for the device.
Your device and another device
are assigned the same I/O
address.
The card is not properly
inserted.
The card may have been
inserted while an application
was running, so your notebook
is not aware of its insertion.
Your software may not have
the correct software driver
active.
You may have the wrong I/O
address selected for your card
device.
Your card device and another
device are assigned the same
I/O address.
The installed primary battery
is completely discharged, there
is no modular bay battery
installed or there is no Power
adapter (AC or Auto/Airline)
installed.
Possible Solutions
See your application software documentation for
additional information.
Remove and reinstall the device. (See Device Ports on
page 40 for more information)
Close the application and restart your notebook.
See your software documentation and activate the
correct driver.
See your device documentation and software docu-
mentation to determine the required I/O address.
Change the settings in the Device Manager.
Check all I/O addresses located within the Device
Manager and any other installed hardware or soft-
ware to make sure there are no duplications.
Remove and re-insert the card. (See PC Cards/
ExpressCards™ on page 36 for more information)
Close the application and restart your notebook.
See your software documentation and activate the
correct driver.
See your card documentation to determine the
required I/O address. Change the settings in the
Device Manager.
Check all I/O addresses located within the Device
Manager and any other installed hardware or soft-
ware to make sure there are no duplications.
Check the Status Indicator Panel to determine the
presence and condition of the batteries. (See Status
Indicator Panel on page 11 for more information)
Install a charged battery or a Power adapter.