Floppy Disk Drive Problems; Hard Drive Problems; Keyboard Or Mouse Problems; Memory Problems - Fujitsu LifeBook A3130 User Manual

falcon3.book Page 51 Thursday, May 24, 2007 8:44 AM
Problem
The Optical Drive Access The auto insertion function is
indicator on the Status active and is checking to see if
Indicator Panel blinks at a disc is ready to run.
regular intervals when no
disc is in the tray or the
optical drive is not installed.

Floppy Disk Drive Problems

You cannot access the You tried to write to a write
optional external floppy protected floppy disk.
disk drive.
Floppy disk is not loaded
correctly.
The floppy disk drive may not
be properly installed.
Security is set to protect access
to floppy disk data.

Hard Drive Problems

You cannot access your The wrong drive designator
hard drive. was used by an application
when a bootable disc was used
to start the notebook.
Security is set in the BIOS so
your operating system cannot
be started without a password.

Keyboard or Mouse Problems

The built-in keyboard does The notebook has gone into
not seem to work. Sleep mode.
Your application has locked
out your keyboard.
You have installed an Your external device is not
external keyboard or properly installed.
mouse, and it does not
Your operating system soft-
seem to work.
ware is not set up with correct
software driver for that device.
You have connected an Your operating system soft-
external keyboard or mouse ware is not setup with correct
and it seems to be locking software driver for that device.
up the system.
Your system has crashed.

Memory Problems

Your Power On screen, or Your memory upgrade module
Main menu of the BIOS is not properly installed.
setup utility information,
does not show the correct
You have a memory failure.
amount of installed
memory.
Possible Cause
This is normal. However, you may disable this
feature.
Eject the floppy disk and set it to write enable.
Eject floppy disk, check orientation and re-insert.
Remove and reinstall your floppy disk drive.
Verify your password and security settings.
Verify drive designator used by application is in
use by the operating system. When the operating
system is booted from a disc, drive designations
are automatically adjusted.
Verify your password and security settings.
Push the Power/Suspend/Resume button.
Try to use your integrated pointing device to restart
your system.
Reinstall your device. (See Device Ports on page 44 for
more information)
Check your device and operating system
documentation and activate the proper driver.
Check your device and operating system
documentation and activate the proper driver.
Try to restart your notebook.
Remove and reinstall your memory upgrade
module. (See Memory Upgrade Module on page 42
for more information)
Check for Power On Self Test (POST) messages.
(See Power On Self Test Messages on page 57 for more
information)
T r o u b l e s h o o t i n g
Possible Solutions
51