Chapter 2 Preparing To Install The Router; Regulatory Compliance; Safety Guidelines; Safety With Equipment - Cisco 901 Installation Manual

Preparing to Install the Router
This chapter describes site requirements and equipment used to install the Cisco ASR 901 router. It
includes the following sections:
•
•
•
•

Safety Guidelines

Before you begin installing the Cisco ASR 901 router, review the safety guidelines in
Precautions, page
damaging the equipment.
In addition, before replacing, configuring, or maintaining the Cisco ASR 901 router, review the safety
warnings listed in the document
901 Series Aggregation Services

Safety with Equipment

The following guidelines help ensure your safety and protect the equipment. This list does not include
all the potentially hazardous situations, so be alert.
Before connecting the system to the power source, read the installation instructions. Statement 1004
Warning
•
•
•
•
•
•
•
OL-23778-01
Safety Guidelines, page 2-1
Prerequisites, page 2-4
Site Planning, page 2-4
Console Port Considerations, page 2-8
1-5, and the
Before moving the system, always disconnect all the power cords and interface cables.
Never assume that power is disconnected from a circuit; always check.
Before and after installation, keep the chassis area clean and dust-free.
Keep tools and assembly components away from walk areas to avoid tripping over them.
Do not work alone in potentially hazardous conditions.
Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.
Do not wear loose clothing that may get caught in the chassis.
Cisco ASR 901 Series Aggregation Services Router Hardware Installation Guide
C H A P T E R
Rack-Mounting Configuration Guidelines, page 3-2
Cisco Regulatory Compliance and Safety Information for Cisco ASR
Router.
2
Safety
to avoid injuries or
2-1