Altos R520 Installation Configuration Guide
Software Required
The management utility of onboard SATA RAID and NIC can be found in the
EasyBUILD.
Software
RAID Web Console
2
Intel PROSet Utility
Configuring onboard SATA RAID
Please refer to the Appendix C. for the onboard SATA RAID configuration.
Installation Tips
NOTE. There is no built-in driver of Onboard SATA RAID in the Windows Server
2008 x64. You need an external USB floppy drive or USB Flash drive to load
driver during the OS installation.
Please make a driver diskette from the EasyBUILD first before the
1.
installation.
Click on "Load Driver" when "Where do you want to install Windows"
2.
message displayed.
Select "Intel Embedded Server RAID Technology II (A:\MegaSR.inf)" as
3.
target driver
After loading the RAID driver from diskette, you could click "Drive
4.
options" to partition the drive.
Follow the normal procedure to finish the installation.
5.
After the installation completes, you would see the following devices
6.
with yellow mark in Device Manager.
16
Version
2.63
EasyBUILD 8.0 build 200 (or later)
13.0.44.0
EasyBUILD 8.0 build 200 (or later)
EasyBUILD Version