Pc Mode Adjustment; Image Settings - Fujitsu Siemens Computers MYRICA V17-1 Operating Manual

PC mode adjustment

Press the PC button to directly switch to PC mode. If PC input timing isn't the LCD TV's preset
timing (refer to "PC input preset timing table" on page 53) press Auto Image Adjust to optimize the
image. If it still has Horizontal interference on screen, adjust Fine Tune to correct the phase.

Image settings

► Press the MENU button to display the main menu screen.
► Press UP/DOWN button to move the cusor to Image.
► Press the MENU button to enter Image adjust.
► Press the UP/DOWN button to the desired item (H./V. Position, H. Phase, Fine Tune).
► Press the MENU button to set the desired item (H./V. Position, H. Phase, Fine Tune).
► Press the MENU button to return to the previous screen or press the EXIT button to exit.
Main Menu Screen
Main Display
Sub Display
Contrast/Brightness
Auto Image Adjust
Image
Colour
Menu Setup
Audio
PIP Setup
Reset
Exit
H./V. Position
H. Phase
Fine Tune
Exit
A26361-K961-Z100-1-5E19, edition 2
Image
37