Nicam/Igr Broadcast Selection - Fujitsu Siemens Computers MYRICA V17-1 Operating Manual

NICAM/IGR broadcast selection

Depending on the particular program being broadcast, you can press the SOUND button to listen to
stereo, bilingual or monaural.
► Press the SOUND button directly to display the three states on the top right of the screen.
► Press the SOUND button repeatedly to select the following states.
Stereo broadcast
● Each time you press SOUND, the mode changes between Stereo and Mono.
● When Mono is selected, the TV sound is output monaurally.
In stereo reception, if the stereo signal is weak, you can switch to Mono.
Bilingual broadcast
Each time you press SOUND, the mode changes as follows: A – B – A/B – Mono.
● A sends the primary broadcast language to the loudspeakers.
● B sends the secondary broadcast language to the loudspeakers.
● A/B sends a seperate language to each loudspeaker.
Monaural broadcast (For NICAM broadcasts)
● Each time you press SOUND, the mode changes between Nicam and Mono.
A26361-K961-Z100-1-5E19, edition 2
TV mode adjustment
31