G Adjusting The Horizontal Blade (Flap); G Adjusting The Vertical Blade (Louvre); G 3-D Air Flow; Adjusting The Air Flow Direction - Daikin Inverter FTKD50BSG Operational Manual

Adjusting the Air Flow Direction

You can adjust the air flow direction to increase
your comfort.
Adjusting the
horizontal blade (flap)
Press .
G Ever y time the button is pressed, "
appears or disappears.
.......
The flap automatically
swings up and down.
....... To stop the flap at an
angle you like, press
Adjusting the
vertical blade (louvre)
Press .
G Every time the button is pressed, "
appears or disappears.
.......
The louvre automatically
swings right and left.
....... To stop the flap at an
angle you like, press
Notes on flap angles
G When [SWING] is
selected, the flap
swinging range depends
on the operation mode.
(See the figure.)
G The diffuser is
kept open in DRY
or COOL mode.
"
3-D air flow
The 3-D air flow function controls the air flow by
alternating the horizontal swing (up and down)
and vertical swing (left and right).
This provides good air circulation throughout
the room and reduces temperature fluctuations.
.
Press
conditioner is operating.
I I I I I To cancel 3-D air flow:
Press
NOTE
"
Unless [SWING] is selected, you should set
the flap at a nearhorizontal angle in COOL
or DRY mode to obtain the best
performance.
ATTENTION
G Always use a remote controller to adjust
the flap angle. If you attempt to move it
forcibly with hand when it is swinging, the
.
mechanism may be broken.
DRY⋅COOL
and during the air
The up/down and left/right
swing displays on the remote
controller will move.
or .
11