System Setup; Setup Mode; Setup Screen (Main Set Up); Brightness - Acura 2009 TL Navigation System Owner's Manual

Main Menu

SETUP Mode

The SET UP function consists of two
main screens that allow you to change
and update information in the system.
NOTE:
For information on the available voice
commands, see Voice Command Index
on page 163 .

SETUP Screen (Main Set up)

Select Set up from the INFO screen
(Main info), and the following screen
will display.

Brightness

The screen brightness has 11 settings.
To change the brightness, use the voice
control system and say "Brightness up"
or "Brightness down." You can also
select Brightness and change the
setting by rotating the Interface Dial
knob.
Tip:
If you are having trouble viewing the
screen in bright lighting conditions, try
increasing the brightness.

2009 TL

System Setup

Contrast

The screen contrast has 11 settings.
To adjust the contrast, use the voice
control system and say "Contrast up"
or "Contrast down." You can also select
Contrast and change the setting by
rotating the Interface Dial knob.

Black Level

The screen black level has 11 settings.
To change the black level, use the voice
control system and say "Black level up"
or "Black level down." You can also
select Black Level and change the
setting by rotating the Interface Dial
knob.
NOTE:
You can have separate daytime and
nighttime settings for Brightness,
Contrast, and Black Level. Adjust each
setting when the display is in either
daytime or nighttime mode. Use the
Display Mode button (page
115 ) to select Daytime or Nighttime
mode.
Navigation System
10 and
93