Operating Environment; Voice Recognition Environment Test; Enabling Voice Recognition - Samsung UN55F9000AF E-Manual

Operating Environment

Voice Recognition and the

Voice Recognition Environment Test

Perform a
clarity and the ambient sound of the surrounding area. Ambient noise can cause Voice Recognition
to malfunction. (Suitable Ambient Noise Level: Less than 40 dB, *40 dB - the sound at library or
residential area in the daytime.) Visit the Samsung website for a list of standard voice commands.
The voice recognition rate varies depending on the volume/tone, pronunciation, and ambient
environment (TV sound and ambient noise).
Voice Recognition Environment Test
가상리모컨 Menu
¤
>
Try Now
This test determines how well Voice Recognition will work in the TV's current environment. This test
must be performed before using Voice Recognition to make sure it functions properly.
11
Run the Voice Recognition Environment Test and stand within 4 m of the TV.
21
Start
Select to measure the ambient noise. If the ambient noise level is suitable, the test will
proceed to the next step. If this part of the test fails, remain quiet and try again.
31
This part of the test measures the volume and clarity of the user's voice. A command will appear
on the TV's screen. Say the command loud and clear within 30 seconds. If the TV successfully
recognizes the user's voice, the test proceeds to the next step. If this part of the test fails, try
again.
41
To measure the level of echo in the surrounding area. If the echo level is suitable, the Voice
Recognition Environment Test will end.

Enabling Voice Recognition

Say the trigger word or press the
use Voice Recognition to operate the TV.
If Voice Recognition is not working, check to see if
Recognition Voice
>
must be set to On.
"
While Voice Recognition is activated, the TV can turn on automatically due to an environmental input.
Turn TV On
voice command should be used within 4 m of the TV.
Smart Features
m
>
음성인식
Recognition) has been enabled. To use Voice Recognition,
prior to using Voice Recognition to test the level and
Voice Recognition
>
button to run Voice Recognition. Say a command. Users can
Try Now
Voice Recognition (Smart Features
Voice Recognition Environment Test
>
Voice Recognition
Voice
>