Clock And Timer; Setting The Time; Auto; Manual - Samsung UN55F9000AF E-Manual

Clock and Timer

가상리모컨 Menu
¤
>
System
Setup
Menu Language
Time
Device Manager
Eco Solution
Auto Protection Time
Auto Wall Mount
"
The displayed image may differ depending on the model.
Use the clock and timer to make scheduled use of the TV easier and more efficient. Once the clock
has been set, you can select the
The clock must be reset every time the power is disconnected.

Setting the Time

가상리모컨 Menu
¤
>
Set the clock manually or automatically.

Auto

Automatically download the correct time from a digital channel. To enable this option, an antenna
cable has to be connected to the TV. The accuracy of the time information received may vary
depending on the channel and signal. Set
Time Offset
가상리모컨 Menu
¤
>
If the set time is not accurate, users can set the time offset to adjust the time difference hourly from
-12 to +12 hour. Changing Time Offset is only available, when the Time is set to auto, and is set
through a network.
The current time will be set through a network, if the TV fails to receive the time information including
the broadcast signal from TV stations. (ex: Watching TV via set-top box, Satellite receiver, or etc)

Manual

Manually enter the time. Set
time and date.
System Time
m
> >
English
2 hours
정보표시
System Time
m
> >
System Time
m
> >
Clock Mode
Try Now
button on the virtual remote panel to check the current time.
Clock
>
Try Now
Clock Mode to Auto.
Clock Time Offset
> >
Manual
to and then select
Try Now
Clock Set
to enter the current